All Blog
Diagnostics
What that knocking sound in your walls actually means
Water hammer is loud, sudden, and hard on your joints and fittings. The fix is usually simpler and cheaper than people expect.

Elena Ruiz

That bang in the wall when a tap or an appliance shuts off is called water hammer. It is not cosmetic, and it is not something a house simply does, it is a pressure shock travelling back through your pipework.
Why it happens
Fast-closing solenoid valves in dishwashers and washing machines stop a moving column of water almost instantly. That momentum has to go somewhere, so it converts into a pressure spike that hits every joint, fitting, and appliance valve on the line.
Why it matters
Each spike is small. Repeated thousands of times over a few years, they loosen compression fittings, fatigue solder joints, and shorten the life of the very appliances causing them. Most of the sudden pinhole leaks we attend on otherwise healthy copper trace back to years of hammer.
If the banging has become louder or started happening on fixtures that were previously quiet, the system pressure has likely risen as well. That is worth measuring.
The usual fix
Most homes need an arrestor fitted close to the offending appliance, or the existing air chambers simply need recharging, which means draining the system and letting them refill with air. Both are short visits, not a repipe, and both are usually done in under an hour.


