All Blog

Seasonal

Winter-proofing your pipes in a single weekend

Insulation, shut-off valves, and a drip schedule for the coldest nights. A short checklist that prevents the most expensive call we get.

Marcus Reed

Frozen pipes are the most preventable emergency on our books. A weekend of preparation in autumn removes almost all of the risk, and the work is well within reach of most homeowners.

Insulate the vulnerable runs

Anything in a crawlspace, garage, attic, or running against an exterior wall is exposed. Foam sleeves cost a few dollars per metre, slide on by hand, and take an afternoon to fit across a typical house.

Pay particular attention to the first metre of pipe after it enters the building and to any run that passes near a vent or airbrick. Those are the two places we see burst most often.

Know your shut-off

Label the main shut-off valve so anyone in the house can find it in the dark, and turn it a quarter turn now to confirm it still moves. Valves that have not been touched in years tend to seize exactly when you need them.

Plan your drip

On nights forecast below freezing, open the tap furthest from the main to a slow, steady drip. Moving water is far harder to freeze than still water, and the few litres you use overnight cost a fraction of a single repair.

If you are leaving the property empty for more than a few days in winter, shut the water off at the main and drain the system. It is the only measure that removes the risk entirely.

Create a free website with Framer, the website builder loved by startups, designers and agencies.