All Blog
Water Heaters
Why your hot water runs out halfway through a shower
Sediment, a worn dip tube, or a thermostat drifting out of range, three common causes, and how to tell which one you're dealing with.

Elena Ruiz

A tank that used to give you twenty minutes of hot water and now gives you eight has not simply gotten old. Something specific changed, and in almost every case it is one of three things.
Sediment at the bottom of the tank
Minerals settle out of the water over time and form a hard layer across the base of the tank. The burner then has to heat through that layer before it heats any water, which costs you both capacity and gas.
Flushing the tank once a year keeps that layer thin. On a tank that has never been flushed, the difference after a service visit is usually obvious the same evening.
A cracked dip tube
The dip tube carries incoming cold water to the bottom of the tank so it heats from below. When it cracks, common on tanks past the ten year mark, cold water mixes straight into the hot outlet at the top. You get lukewarm water immediately, even with a full tank.
A thermostat that has drifted
Thermostats lose calibration slowly. A unit set to sixty degrees that is actually delivering forty-eight will feel like a capacity problem when it is really a temperature one. This is the cheapest of the three to fix and takes about five minutes during a routine visit.
If your tank is under twelve years old, all three of these are worth repairing rather than replacing. We will tell you honestly which side of that line you are on.


